GET YOUR QUOTE NOW!
fill out the form to get your personal consultation, or call us at (352)484-0850
All L&M industrial Air Compressors AMAZING Standard Features!
Five Stages
-Radial layout for reduced vibration and crank shaft loading
-Spin-on Type Oil Filter
-Connecting rods with needle roller bearings
-Stainless steel valve assemblies on all stages
-Latest technology in valve and ring design
-Relief Valves on 1st, 2nd, 3rd & 4th Stage
-Intercoolers on 1st, 2nd, 3rd & 4th, after cooler on 5th stage
-Pressurized oil lubrication system
-Cast Iron Block and Cylinders
-Water separators on 2nd, 3rd & 4th stages
-Designed and built in the USA
Industrial Air Compressors
Designed and Built in the USA
L & M Compressor, LLC is a group of specialists whose identity focuses on four areas of high pressure compressor pumps:
- compressor check reliable products and comprehensive knowledge of industrial applications
- compressor check service: Provide in-house Technical Support on industrial air Compressors
- compressor check in stock availability on industrial air Compressors
- compressor check design and produce high pressure gas compressor pumps that exceed the existing industry offerings
Exceeding Industry Standards
We produce the highest quality products available exceeding industries standards. Our quality control procedures insure constant and reliable products.Contact us for more information.
RPM Technology
All of our industrial air compressers are five stage radial design to reduce heat, vibration, and noise while raising efficiency.
Made in the USA
L & M Compressor, LLC. is a Florida based Compressor company with a group of high-pressure specialists and engineers. The Grizzly Series High Pressure Compressors are designed, built and tested in our facility in Ocala Florida.
Industrial Air Compressors
Pressures:
550 psig (38 bar)1530 psig (105 bar)
2500 psig (172 bar)
3100 psig (214 bar)
Power Requirements:
15 hp (11 kW)20 hp (15 kW)
25 hp (18.5 kW)
30 hp (22.5 kW)
5 Cylinder, 3 Stage Industrial Compressor |
||||||
| Model | Max Working Pressure | Capacity 1) | Motor | |||
| psi | bar | scfm | l/min | hp | kw | |
| ML315-05 | 550 | 38 | 36.5 | 1034 | 15 | 11 |
| ML320-05 | 550 | 38 | 49.0 | 1388 | 20 | 15 |
5 Cylinder, 4 Stage Industrial Compressor |
||||||
| Model | Max Working Pressure | Capacity 1) | Motor | |||
| psi | bar | scfm | l/min | hp | kw | |
| MM415-1.5 | 1,530 | 105 | 22.5 | 637 | 15 | 11 |
| MM420-1.5 | 1,530 | 105 | 29.5 | 835 | 20 | 15 |
| MM425-1.5 | 1,530 | 105 | 37.0 | 1048 | 25 | 18.5 |
| MM430-2.5 | 2,500 | 172 | 38.5 | 1090 | 30 | 22.5 |
| MH415-3 | 3,000 | 207 | 17.4 | 491 | 15 | 11 |
| MH420-3 | 3,000 | 207 | 23.0 | 651 | 20 | 15 |
| MH425-3 | 3,000 | 207 | 28.0 | 793 | 25 | 18.5 |
1) Displaced Capacity is referenced to standard inlet conditions. Actual output equals Volumetric Efficiency X Displaced Capacity @ 80% of the compressor’s maximum working pressure. Tolerance +5/-4%
2) Specifications are subject to change.
